To Next PageTo Next Page
Need help?Do you have a question about the Meggitt F145 Series and is the answer not in the manual?
General| Brand | Meggitt |
|---|---|
| Model | F145 Series |
| Category | Control Unit |
| Language | English |
Explains the meaning of safety alert symbols like DANGER, WARNING, CAUTION.
Recommends wearing protective clothing for maintenance.
Advises using only approved equipment and having firefighting gear ready.
General information about the manual's purpose and manufacturer.
Defines the scope and limitations of the manual's instructions.
Emphasizes using approved procedures and safety precautions.
States that weights and measurements are in both English and Metric units.
Explains that the manual will be revised as necessary.
Describes the function and components of the pressure fuelling nozzle.
Explains the operational states: Uncoupled, Coupling and Opening, Closing and Uncoupling.
Introduces the section on special tools and test equipment.
Specifies test fluid and lubricant to be used.
Outlines the steps for performing a functional test on the nozzle.
Describes the leakage test procedure for specific nozzle variants.
Details the leakage test procedure for different coupling types.
Introduces the fault isolation procedures and references Table 6.
Details routine checks and replacement of defective seals.
States that the section describes the full disassembly procedure.
Details the step-by-step process for disassembling the nozzle.
Lists the materials recommended for cleaning the nozzle parts.
Provides instructions for cleaning metal and non-metallic parts.
Instructs on general inspection criteria and minor/major damage handling.
Specifies checks for individual components like screws, bolts, nuts.
States that repairable components are limited and outlines when to return the nozzle.
Details the steps for performing repairs on the nozzle.
Step-by-step guide for replacing the nose seal seat.
Provides methods for replacing the cross shaft seal.
Instructions for replacing the shoulder bolt and link components.
Details the procedure for replacing the nozzle body bushings.
Outlines the general steps and preparation for nozzle assembly.
Explains the purpose of the illustrated parts list section.
Describes how the parts list is arranged and keyed to illustrations.
Explains the meaning of the modification code in the parts list.
Guides users on how to find part information using the parts list.
Lists abbreviations used in the document, particularly in the parts list.
