Meggitt F145 Series - Leading Particulars; Model Variations

Meggitt Fuelling Products
Maintenance Manual (MMF145)
Pressure Fuelling Nozzle – F145 Series
USE OR DISCLOSURE OF DATA ON THIS PAGE IS SUBJECT TO THE RESTRICTIONS ON THE TITLE PAGE OF THIS DOCUMENT
05 Jan 2015 Revision 6.4 5
3. Leading Particulars
For the leading particulars refer to Table 1.
Table 1. Leading Particulars
Service Fluid ........................................................................................... Automotive and Aviation Fuels
Performance:
Operating Pressure ........................................................................................ 120 psig (827 kPaG)
Temperature:
Ambient .................................................................................................. -40 to 165°F (-40 to 74°C)
Fluid ....................................................................................................... -40 to 165°F (-40 to 74°C)
Mating Inlet Swivels ....................................................................... F595 HECV, F575/F584, F577/F582,
F581 Swivels, F1516/F596 Dry Disconnect
4. Model Variations
The F145 series nozzle is a straight-in fuelling nozzle with a swivel inlet. It is equipped with bicycle-type
grip handles and a dust cover. A flanged swivel adapter is not supplied with the basic nozzle, but can
be ordered as a variation. Refer to Tables 2, 3, and 4 for the available F145 series nozzle variations. An
explanation of the F145 series part numbering system is as follows:
BASIC PART NUMBER
MODIFICATION LETTER GROUP
COUPLING TYPE
SWIVEL BODY TYPE
F145 XXX X
X
P/N
P/N Example: F145APV7A - This nozzle is equipped with a ground cable and has a flanged swivel
adapter and a 100 mesh strainer. The coupling is the 2.5 inch aluminum type with wire raceways to
mate with the F577/F582 swivel body. The swivel body has a 2.5 inch NPT inlet.