Meggitt F145 Series - Table 2. Nozzle Variations (Mod Code Group after F145)

Meggitt Fuelling Products
Maintenance Manual (MMF145)
Pressure Fuelling Nozzle – F145 Series
USE OR DISCLOSURE OF DATA ON THIS PAGE IS SUBJECT TO THE RESTRICTIONS ON THE TITLE PAGE OF THIS DOCUMENT
05 Jan 2015 Revision 6.4 6
Table 2. Nozzle Variations (Mod Code Group after F145)
Examples: F145APV7A, F145BG7A
NOZZLE MOD
LETTER
DESCRIPTION
A
Adds Ground Cable
B
Adds Vacuum Breaker
C
Changes to Stirrup Handles
D
Change nose seal to F117 (1 Piece)
E
Ring Handles
F
Adds Drag Ring
G1
Adds 45 PSI HECV (Flanged)
G2
(Inactive)
G3
Adds additional 45 PSI HECV (Flanged Connection)
H1
Adds 35 PSI HECV (Flanged)
H2
(Inactive)
H3
Adds additional 35 PSI HECV (Flanged Connection)
J
Six (6) Slot Configuration
K
Changes to 10” Long Handles
L1
Adds 50 PSI HECV (Flanged)
L2
(Inactive)
L3
Adds additional 50 PSI HECV (Flanged Connection)
M
Adds 0-100 PSI Pressure Gauge
N1
Adds 55 PSI HECV (Flanged)
N2
(Inactive)
N3
Adds additional 55 PSI HECV (Flanged Connection)
P
Adds Flanged Swivel Adapter
Q
Adds Adapter for J.C.C. Inlet Flange
R
Adds Flight Adapter
Note: Use of a 100 mesh filter (Customer Furnished Equipment CFE))
is recommended.
S
Interlock Storage Bracket
T
Adds 40 Mesh Strainer