meitav-tec MTS/SUPER - 1 Owners Manual; Quick Guide

1. Owner’s manual
-4 -
Fan
only
*Auto
mode
Heat Cool
*Auto
speed
High Low
Press to switch between
fan speeds:
Med.
*In Auto mode, the active
mode will flash
System ON
Press and hold to lock the
thermostat’s buttons
(set-point must be other
than 10ºC/50ºF)
Press and hold
to enter technician settings
(set-point must be equal to
10ºC/50ºF)
Set-point
adjustment
Temperature
scale
Modes
indication
Ambient /
Set-point
temperature
display
Fan speeds
indication
Press to
turn
system
ON or OFF
Press to switch between
system modes:
*In Auto speed, the active
speed will appear
System OFF
1.1 Quick Guide