If you have any questions, contact technical support at:
Tel: 1-888-MEKRA 4U / Fax: (803) 337 5265
E mail: quality@lang-mekra.com
www.lang-mekra.com
These Products May Be The Subject of Pending U.S. Patent Applications
or May Be Covered By One or More U.S. Patents.
Revised 07/2013
Copyright © 2001 – 2013 For the most recent version of this manual, visit www.lang-mekra.com
(G.3) Cleaning the Mirror Glass
A standard glass cleaner and a soft, clean cloth should be used to clean the mirror surface. Avoid abrasive cleaners or brushes,
as they can scratch the glass and damage the mirror plate.
Newer trucks have 1
st
surface glass, which has an exposed reflective
surface and is not subject to corrosion.
To determine the kind of glass, place an object such as a pen on the
glass surface. Angle the pen to one side, so you can see the tip. If there
is a gap between the tip of the object and the tip of the image, the glass
is 2
nd
surface.
To Next Page
Loading...