Melco EMT 1 User Manual

• Single Head, One Needle
• Tubular Goods Hooping
•
Technical Manual for
the EMT 1
embroidery peripheral
Part Number 110344-01, Revision B

Melco EMT 1 Specifications

General

Brand	Melco
Model	EMT 1
Category	Sewing Machine
Language	English

Summary

1. Introduction

Configuring the EMT 1

Details the process of setting up the peripheral, including peripheral program and network address.

Troubleshooting LEDs and Test Points

Guidance on using indicator lights and test points for diagnosing machine conditions.

Various Technical Specifications

Lists tension and force specifications for various mechanical components of the EMT 1.

2. Service Maintenance (except embroidery head)

E-Stop Switch Replacement

Step-by-step guide for replacing the emergency stop switch.

Power Distribution Section

Details the components and replacement of the power distribution module.

Electronics Section and Card Cage Components

Covers access to the card cage, its components, and major PCBs like CPU and Interface.

X Motor and Drive Belt Maintenance

Procedure for replacing the X motor and adjusting the X drive belt tension.

3. Embroidery Head Maintenance

Needle Bar and Presser Foot Replacement

Procedure for replacing the needle bar, presser foot, and associated parts.

Jump Stitch Solenoid Replacement and Adjustment

Procedure for replacing the jump stitch solenoid and its adjustments.

Rotary Hook Replacement and Timing

Procedure for replacing the rotary hook and setting hook timing.

Needle Depth Adjustment

Steps for adjusting the needle depth for proper embroidery.