To Next PageTo Next PageHow to fix not enough milk froth in Melitta Coffee Maker?
If you're not getting enough milk froth from your Melitta Coffee Maker, first check the control dial of the Cappuccinatore and adjust it to the proper position. Also, a dirty Cappuccinatore can cause this issue. Take it apart and clean it thoroughly.
Why is my Melitta Caffeo Solo & Perfect Milk Coffee Maker grinder making a loud noise?
If your Melitta Coffee Maker's grinder is making a loud noise, there might be foreign objects inside. Call the hotline in this case.
Why are bean symbols flashing on my Melitta Coffee Maker if the container is full?
If the bean symbols are flashing on your Melitta Coffee Maker even though the bean container is full, it indicates an insufficient quantity of ground beans in the brewing chamber. Press the button or button to resolve this.
What happens if cleaning/descaling is interrupted on Melitta Caffeo Solo & Perfect Milk Coffee Maker?
If the cleaning or descaling process of your Melitta Coffee Maker was interrupted, for example, due to a power outage, the appliance will perform a rinsing program automatically. Follow the instructions displayed on the appliance to complete the process.
What to do if symbols for cleaning and stand-by flash alternately on Melitta Caffeo Solo & Perfect Milk?
If the cleaning and stand-by symbols are flashing alternately on your Melitta Coffee Maker, it could mean that the brewing unit is missing or not properly inserted. Ensure the brewing unit is correctly in place. Alternatively, the brewing chamber might be overfilled. Try switching the appliance off and on again using the ON/OFF button until standby mode is displayed.
Why is the grinder not grinding in my Melitta Coffee Maker?
If the grinder in your Melitta Coffee Maker isn't grinding, the beans might not be falling into the grinder. Try tapping lightly on the bean container. If that doesn't work, there might be foreign objects in the grinder, in that case you should call the hotline.
Why does coffee only flow drop-by-drop from my Melitta Coffee Maker?
If your Melitta Coffee Maker is only dispensing coffee drop-by-drop, it could be due to the grinding fineness being too fine. Adjust the grinding fineness to a coarser setting. It may also be necessary to clean the brewing unit and perform a descaling or cleaning program.
What to do if my Melitta Coffee Maker coffee does not flow?
If coffee isn't flowing from your Melitta Coffee Maker, it might be because the water tank isn't filled properly or isn't correctly inserted. Make sure to fill the water tank and ensure it's properly in place. Another cause might be an obstructed brewing unit, so try cleaning the brewing unit.
How to fix a Melitta Caffeo Solo & Perfect Milk Coffee Maker that only drips coffee?
If coffee only flows drop-by-drop from your Melitta Coffee Maker, it could be due to the grinding fineness being too fine. Adjust the grinding fineness to be more coarse. Additionally, clean the brewing unit, and if necessary, perform a descaling or cleaning program.
How to fix Melitta Caffeo Solo & Perfect Milk Coffee Maker brewing unit that can no longer be reinserted after removal?
If the brewing unit can't be reinserted after removal, first check if the handle for locking the brewing unit is correctly engaged. If that's not the issue, the actuator might not be in the proper position. To fix this, switch the appliance off and then on again. Press the buttons for single- and two-cup dispensing simultaneously for longer than 2 seconds to put the actuator into position. Then, reinsert the brewing unit, ensuring it's correctly locked into place.
General| Product type | Espresso machine |
|---|---|
| Capacity in cups | 2 cups |
| Number of spouts | 2 |
| Coffee input type | Ground coffee |
| Coffee maker type | Fully-auto |
| Appliance placement | Countertop |
| Water tank capacity | 1.2 L |
| Adjustable coffee strength | Yes |
| Number of temperature settings | 15 |
| Fully automatic | Coffee & Milk |
| Product color | Black, Silver |
| Built-in display | No |
| Housing material | - |
| AC input voltage | 220–240 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 200 mm |
|---|---|
| Width | 325 mm |
| Height | 455 mm |
| Weight | 8300 g |
Risks of fatal electric shock if the appliance or power cable is damaged.
Hot fluids and steam pose a risk of burns and scalding.
Instructions to avoid personal injury and material damage during operation.
How to connect the appliance to power and prepare it for use.
Steps for filling water and beans before operation.
How to adjust coffee volume and strength.
Instructions for brewing one or two cups of coffee.
Procedures for frothing milk and heating liquids.
