EasyManua.ls Logo

Melitta E950-322 - User Manual

Melitta E950-322
246 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DEGBFRNL
IT
ESDKSENO
FI
RUPLTRLTEELVCZCNKRHE
Bedienungsanleitung / Operating Instructions / Mode d'emploi
Gebruiksaanwijzing / Istruzioni per l’uso / Manual de instrucciones
Betjeningsvejledning / Bruksanvisning / Bruksanvisning / Käyttöohje
Руководство по эксплуатации / Instrukcja obsługi / Kullanma kılavuzu
Naudojimo instrukcija / Kasutusjuhend / Lietošanas instrukcija
Návod k obsluze / 操作手册 / 사용 설명서 / הנחיות שימוש

Table of Contents

Questions and Answers

  • S
    Sean FosterAug 14, 2025
    Why does no coffee flow from my Melitta E950-322 Coffee Maker?
    • C
      Crystal MorganAug 14, 2025
      If coffee isn't flowing from your Melitta Coffee Maker, the water tank may not be filled or properly inserted. Ensure the water tank is filled and correctly placed. Alternatively, the brewing unit could be clogged, requiring cleaning.
  • J
    John HarveyAug 17, 2025
    How to fix a Melitta Coffee Maker that only dispenses coffee drop by drop?
    • B
      blake21Aug 18, 2025
      If your Melitta Coffee Maker only dispenses coffee drop by drop, the grinding fineness may be too fine. Adjust the grinding fineness to be more coarse. Also, clean the brewing unit. If necessary, perform a descaling or cleaning program.
  • J
    Joshua ArnoldAug 21, 2025
    What to do if my Melitta E950-322 Coffee Maker says 'no water' when the tank is full?
    • C
      Cody FoxAug 21, 2025
      If your Melitta Coffee Maker indicates "no water" even though the tank is full, it could be due to a blocked float or air in the lines. Check the condition of the float in the water tank, remove the water, and carefully shake the tank. If that doesn't work, fill the water tank and press the button for coffee strength to vent the appliance.
  • C
    claytonsarahAug 25, 2025
    Why is the grinder not working on my Melitta E950-322 Coffee Maker?
    • R
      Ryan BakerAug 25, 2025
      If the grinder is not grinding on your Melitta Coffee Maker, it may be because the beans are not falling into the grinder. Try tapping lightly on the bean container. If this doesn't help, there might be foreign objects in the grinder.
  • J
    James CamposAug 28, 2025
    What happens if the cleaning or descaling process is interrupted on my Melitta Coffee Maker?
    • K
      Kari PetersonAug 28, 2025
      If the cleaning or descaling process on your Melitta Coffee Maker was interrupted (e.g., due to a power outage), the appliance performs a rinsing program autonomously. Follow the instructions on the appliance to complete this process.
  • C
    Chad TaylorAug 31, 2025
    What does it mean when the cleaning and stand-by symbols flash on my Melitta Coffee Maker?
    • J
      Justin SchneiderAug 31, 2025
      When the cleaning and stand-by symbols flash alternately on your Melitta Coffee Maker, it indicates that the brewing unit is either missing or not properly inserted. Ensure the brewing unit is correctly inserted and locked. It could also mean that the brewing chamber is overfilled. In this case, switch off the appliance and switch it on again using the ON/OFF button (repeat if necessary) until standby mode is displayed.
  • J
    Jeremy MccannSep 3, 2025
    What to do if the brewing unit of my Melitta E950-322 Coffee Maker can't be reinserted?
    • V
      Veronica GomezSep 3, 2025
      If the brewing unit of your Melitta Coffee Maker cannot be reinserted after removal, ensure that the handle for locking the brewing unit is correctly engaged. Also, the actuator may not be in the proper position. To resolve this, switch the appliance off and then on again. Then press the button for single- and two-cup dispensing simultaneously for longer than 2 seconds to put the actuator into position. Then reinsert the brewing unit and make sure it is correctly locked into place.
  • W
    Walter JonesSep 7, 2025
    Why are the bean symbols flashing on my Melitta Coffee Maker when the bean container is full?
    • J
      joshua18Sep 7, 2025
      If the bean symbols are flashing on your Melitta Coffee Maker even though the bean container is full, it indicates an insufficient quantity of ground beans in the brewing chamber. Press the buttons for single-cup dispensing or two-cup dispensing to resolve this.
  • A
    Amy AdkinsSep 10, 2025
    What does it mean when all the buttons are flashing continuously on my Melitta E950-322?
    • G
      Glen DurhamSep 10, 2025
      Continuous flashing of all buttons on your Melitta Coffee Maker indicates a system error. Switch off the appliance and switch it on again via the ON/OFF button.

Summary

Safety Instructions

Electrical Hazard Warning

Warns about risks from electrical current and damaged cables.

Burn and Scalding Hazards

Warns about hot fluids and steam during operation.

First-Time Use and Setup

Initial Startup Procedure

Steps for the appliance's first use and initial setup.

Starting and Operating the Appliance

Water Hardness and Filter Management

Dispensing Coffee

How to make coffee, one or two cups.

Cleaning and Maintenance Procedures

Integrated Cleaning Cycle

Steps for the automated cleaning cycle.

Appliance Settings and Features

Integrated Descaling Process

Steps for removing lime scale from the appliance.

Troubleshooting Common Issues

Identifying Malfunctions and Causes

Lists common issues and their potential causes.

Handling System Errors

How to resolve continuous button flashing indicating an error.

Restoring Factory Defaults

Melitta E950-322 Specifications

General IconGeneral
ModelE950-322
BrandMelitta
Coffee Bean Container Capacity250 grams
Power Consumption1450 watts
Pump Pressure15 bar
CapacityUp to 2 cups
Power1450 watts
Water Tank MaterialPlastic
ProgrammableYes
Auto Shut-OffYes
Keep Warm FunctionYes
Coffee TypeEspresso
Water Tank Capacity1.8 L
FeaturesAdjustable coffee strength

Related product manuals