Why does no coffee flow from my Melitta E950-103?
If coffee isn't flowing from your Melitta Coffee Maker, the water tank may not be filled or properly inserted. Ensure the water tank is filled and correctly placed. Alternatively, the brewing unit could be clogged, requiring cleaning.
How to fix a Melitta E950-103 that only dispenses coffee drop by drop?
If your Melitta Coffee Maker only dispenses coffee drop by drop, the grinding fineness may be too fine. Adjust the grinding fineness to be more coarse. Also, clean the brewing unit. If necessary, perform a descaling or cleaning program.
What to do if my Melitta E950-103 Coffee Maker says 'no water' when the tank is full?
If your Melitta Coffee Maker indicates "no water" even though the tank is full, it could be due to a blocked float or air in the lines. Check the condition of the float in the water tank, remove the water, and carefully shake the tank. If that doesn't work, fill the water tank and press the button for coffee strength to vent the appliance.
Why is the grinder not working on my Melitta E950-103?
If the grinder is not grinding on your Melitta Coffee Maker, it may be because the beans are not falling into the grinder. Try tapping lightly on the bean container. If this doesn't help, there might be foreign objects in the grinder.
What happens if the cleaning or descaling process is interrupted on my Melitta E950-103?
If the cleaning or descaling process on your Melitta Coffee Maker was interrupted (e.g., due to a power outage), the appliance performs a rinsing program autonomously. Follow the instructions on the appliance to complete this process.
What does it mean when the cleaning and stand-by symbols flash on my Melitta E950-103?
When the cleaning and stand-by symbols flash alternately on your Melitta Coffee Maker, it indicates that the brewing unit is either missing or not properly inserted. Ensure the brewing unit is correctly inserted and locked. It could also mean that the brewing chamber is overfilled. In this case, switch off the appliance and switch it on again using the ON/OFF button (repeat if necessary) until standby mode is displayed.
What to do if the brewing unit of my Melitta E950-103 can't be reinserted?
If the brewing unit of your Melitta Coffee Maker cannot be reinserted after removal, ensure that the handle for locking the brewing unit is correctly engaged. Also, the actuator may not be in the proper position. To resolve this, switch the appliance off and then on again. Then press the button for single- and two-cup dispensing simultaneously for longer than 2 seconds to put the actuator into position. Then reinsert the brewing unit and make sure it is correctly locked into place.
Why are the bean symbols flashing on my Melitta E950-103 when the bean container is full?
If the bean symbols are flashing on your Melitta Coffee Maker even though the bean container is full, it indicates an insufficient quantity of ground beans in the brewing chamber. Press the buttons for single-cup dispensing or two-cup dispensing to resolve this.
What does it mean when all the buttons are flashing continuously on my Melitta E950-103?
Continuous flashing of all buttons on your Melitta Coffee Maker indicates a system error. Switch off the appliance and switch it on again via the ON/OFF button.
Electrical shock risk due to damaged appliance or power cable.
Steps to prepare and start the appliance for the first time.
Adjusting coffee volume and brew strength.
Instructions for brewing one or two cups.
Automatic programme to remove residues and oils.
Automatic programme to remove lime scale.
Troubleshooting step for system errors indicated by flashing buttons.
General| Brand | Melitta |
|---|---|
| Model | E950-103 |
| Category | Coffee Maker |
| Language | English |
To Next Page