EasyManuals Logo

Melitta E950-103 User Manual

Melitta E950-103
Go to English
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Operating Instructions: Melitta
®
Solo
®
|
1828-0618 | 2018-08
23
Other settings
GB
Integrated descaling programme
WARNING
The descaling agent can cause skin
irritations!
Comply with the safety instructions
and the dosing information speci ed
on the descaling agent packaging.
The integrated descaling programme
(takes about 30 minutes) removes lime
residues inside the appliance. The symbol
for descaling
ashes during the entire
process.
The descaling programme should be
performed every 3 months, however, at
the latest when
illuminates ("Setting
the water hardness", page 21).
Only use Melitta
®
ANTI CALC.
Switch off the device.
Remove the water lter if necessary
("Water hardness and lter", page 20).
Press the
and buttons
simultaneously for approx. 3 seconds.
ashes, illuminates.
Descaling phase 1 (
):
Empty and reinsert the drip tray.
illuminates.
Completely empty the water tank.
Add the descaling agent to the water
tank according to the instructions on the
packaging.
Insert the water tank.
Press the
button to start the
descaling programme
(takes about 15 minutes).
Descaling phase 2 ( ):
When
illuminates, proceed as follows:
Empty and reinsert the drip tray.
illuminates.
Remove the water tank and rinse
thoroughly.
Fill the water tank with tap water up to
the max. mark.
Insert the water tank.
Press the
button to continue with
the descaling programme (takes about
5 minutes).
Descaling phase 3 ( ):
When
illuminates, proceed as follows:
Empty and reinsert the drip tray.
When
is illuminated, the descaling
programme is nished.
Insert the water lter if necessary
("Water hardness and lter", page 20).
Other settings
Energy-saving mode
After the last action, the appliance
switches automatically (depending on the
settings) to the energy-saving mode. The
appliance is factory-set at 5 minutes .
Switch on the device.
Press the
and buttons
simultaneously until ashes.
Press the button twice.
illuminates.
Press the
button until one of the four
times is set. The time is displayed by the
beans on display 9.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Melitta E950-103 and is the answer not in the manual?

Melitta E950-103 Specifications

General IconGeneral
BrandMelitta
ModelE950-103
CategoryCoffee Maker
LanguageEnglish

Related product manuals