Melitta epour - Manual Extraction Control; Custom Brewing Profile (Barista Mode); Warm-keeping and Auto-Off; Warm-keeping Feature

10
into the appliance. This removes any air bubbles
which may possibly have formed during filling.
•Duringbrewing,thewaterisheatedandowsvia
the rotating outlet onto the coee powder .
Dierent brewing profiles are stored in the appliance
for the dierent preparation quantities of 2 to 8
cups. Depending on the quantity of water filled, the
rotation directions and times are adapted so that the
coee powder is always dampened in an optimum
way.
Note: It is also possible to manually control the
direction and time of the rotation during brewing
(see “3.3 Manual extraction control”).
•Youwillhearabriefsignalsoundattheendof
preparation. The BREW button will now light up
continuously to indicate the warm-keeping phase.
•Thekeep-warmplatewillkeepthecoeehotand
then switch o automatically after 40 minutes to
avoid unnecessary power consumption. You can, of
course, switch o the appliance manually at any time
by pressing the BREW button longer (>1 sec.).
•Thedripstoponthelterholderpreventscoee
continuing to drip when you remove the jug from
the appliance.
•Theremovablelterholderallowsyoutodisposeof
the filter paper easily and trouble-free.
3.3 Manual extraction control
•Manualextractioncontrolispossibleaftertheoutlet
starts to rotate
•Alongpress(>1 sec.) of the CONTROL button 
switches on manual extraction control. The button lights
up.
•PressingtheCONTROLbuttonbriey(<1 sec.) allows
you to then change the rotation direction of the outlet
manually. You can change the direction of rotation as
many times as you want.
•Themanualextractioncontrolisendedagainbypressing
the CONTROL button longer (>1 sec.). The extraction
control is automatic again.
3.4Usingacustombrewingprole
 (“BaristaMode”)
The brewing profiles stored for the preparation
quantities or number of cups are suitable for preparing
numerous dierent types of coee. Furthermore, the
manual extraction control described in “3.3” allows
the rotation direction and time to be also changed.
This change does not aect the stored brewing
profiles.
You can, however, create one custom brewing profile
for a specific number of cups, store it and call it up
again later
•Firstlltheappliancewiththerequiredquantityof
water and coee.
•Activatetheappliancewithalongpress(>1 sec.) on
the BREW button. The BREW button starts to flash
rapidly.
•PressingtheBREWandCONTROLbuttonssimulta-
neously for longer starts brewing to store a custom
brewing profile (“Barista Mode”). The BREW and
CONTROL buttons will start flashing rapidly at the
same time and the outlet will start to rotate.
Important: If a custom brewing profile has previ-
ously been stored, it will be deleted by this process.
•Youcannowcontrolthedampingofthecoee
powder yourself by pressing the CONTROL button
briefly (<1 sec.) to change the direction of rotation.
•Ifnecessary,youcanalsoprogramabloomingpause.
Briefly pressing (<1 sec.) the PRE-BREW button
interrupts the brewing process and pressing the
PRE-BREW button again restarts it. You can now
continue controlling the brewing process again with
the CONTROL button.
•Ifthewatertankisempty,theheaterwillswitcho
and the BREW button will light up continuously. At
the same time, the CONTROL button will start to
flash for 20 seconds. Pressing the CONTROL button
for longer (>1 sec.) within the 20 seconds stores the
custom brewing profile.
•Ifyouwanttocallupthestoredcustombrewing
profile at a later time, first activate the appliance as
usual by pressing the BREW button longer (>1 sec.).
The BREW button starts to flash rapidly. Pressing
the CONTROL button for longer (>1 sec.) calls up
the custom brewing profile. The CONTROL button
will now also start to flash rapidly.
•Brewingisstartedwithashortpress(<1 sec.) of
the BREW button. The BREW and the CONTROL
button both start to flash slowly.
•Final note: You can cancel the creation of an individual
brewing profile in “Barista Mode” by simultaneously
pressing the BREW and CONTROL buttons for
longer.
4. Warm-keeping/automatic switch-off
The taste of coee changes when it is kept warm for
longer periods. To prevent this, you should enjoy your
coee as fresh as possible immediately after brewing.
Furthermore, unnecessarily keeping the coee warm
costs valuable energy.
If you still want to keep the coee warm, the appliance
will automatically switch o 40 minutes after the
brewing process ends.
The BREW button is lit up continuously during warm-
keeping. You can also switch o the keep-warm plate
manually by pressing the BREW button longer (>1 sec.).
If the appliance is not used, it will switch o automatically
after 5 minutes.
You can then activate the appliance again by pressing the
BREW button (>1 sec.).
5. Descaling
Limescale in the appliance increases with each brewing
process depending on the hardness of the water that
is used. This is indicated by the CALC display 
lighting up red. The appliance should be descaled at re-
gular intervals or, at the latest, when the CALC display
lights up. Please use a commercially available descaling
agent to do this.
We recommend using Melitta
®
“Anti Calc Liquid for
Filter Coee & Aqua Machines“.
5.1 Descaling process
•Preparethedescalinguidasspeciedbythemanu-
facturer and pour it into the water tank.
•Placethejugonthekeep-warmplateandplacethe
filter holder in the intended position underneath the
outlet.
•ActivatetheappliancebypressingtheBREWbutton
longer (>1 sec.) as for coee preparation.
GB