What to do if Mellanox Technologies Computer Hardware adapter no longer works?
If your Mellanox Technologies Computer Hardware adapter stops working, try the following: * Reseat the adapter in its slot or try a different slot. * Use another cable. * Reinstall the drivers, as network driver files may be damaged. * Reboot the server.
How to fix Mellanox Technologies Computer Hardware server unable to find the adapter?
If the server is unable to find the Mellanox Technologies Computer Hardware adapter: * Ensure the adapter is correctly placed. * Verify adapter slot and adapter compatibility. * Install the adapter in a different PCI Express slot. * Use the drivers that came with the adapter or download the latest. * Update your motherboard to the latest BIOS. * Reboot the server.
What to do if Mellanox Technologies Computer Hardware adapters stopped working after installing another adapter?
If Mellanox Technologies Computer Hardware adapters stopped working after installing another adapter: * Try removing and reinstalling all adapters. * Check that cables are connected properly. * Ensure your motherboard has the latest BIOS.
What to do if Mellanox Technologies Computer Hardware link light is on, but with no communication established?
If the Mellanox Technologies Computer Hardware link light is on, but no communication is established: * Check that the latest driver is loaded. * Check that both the adapter and its link are set to the same speed and duplex settings.
General| Product Name | ConnectX-3 |
|---|---|
| Model Number | MCX312A-XCBT |
| Manufacturer | Mellanox Technologies |
| Interface Type | PCI Express 3.0 x8 |
| Ports | 2 |
| Port Type | SFP+ |
| Data Rate | 10 Gbps |
| Maximum Data Rate | 40 Gbps |
| Protocols | InfiniBand, Ethernet |
| Ethernet Speed | 10 Gbps |
| Form Factor | Low Profile |
| Compliance | RoHS |
| Category | Network Adapter |
| Operating Temperature | 0°C to 55°C (32°F to 131°F) |
| InfiniBand Speed | FDR (56Gb/s) |
To Next Page
