Need help?Do you have a question about the Mellanox Technologies ConnectX-5 and is the answer not in the manual?
General| Manufacturer | Mellanox Technologies |
|---|---|
| Model | ConnectX-5 |
| RoHS Compliance | Yes |
| Product Type | Network Adapter |
| Interface | PCIe 3.0/4.0 x16 |
| Maximum Bandwidth/Data Rate | 100 Gbps |
| Supported Protocols | Ethernet, InfiniBand |
| Virtualization Support | Yes |
| RDMA Support | Yes |
| Operating Temperature | 0°C to 55°C (32°F to 131°F) |
| Ports | 1 or 2 ports |
Overview of adapter card ordering numbers, port speed, and PCI Express speed.
Details the key features and advantages of ConnectX-5 VPI adapter cards.
Lists supported operating systems and distributions for Mellanox ConnectX-5 adapters.
Describes the connectivity options and interoperability of Mellanox ConnectX-5 adapters.
Details the InfiniBand interface compliance and traffic transmission for ConnectX-5 cards.
Explains Ethernet QSFP28 interface compliance with IEEE 802.3 standards.
Covers PCI Express Gen 3.0/4.0 support, link rates, and negotiation for the adapter.
Describes the bi-color I/O LED per port for link status indication.
Outlines the hardware and environmental requirements for installing Mellanox adapters.
Refers to the section detailing supported OS and distributions for the cards.
Provides crucial safety instructions to avoid injury and equipment damage during installation.
Lists essential checks before proceeding with the hardware installation of the adapter card.
Guides on replacing the default tall bracket with a short bracket.
Step-by-step instructions for physically installing the adapter card into a PCIe slot.
Information on obtaining supported Mellanox cables and modules for the adapter.
Provides safety precautions and steps for removing the adapter card from the system.
Instructions for identifying the installed Mellanox adapter card in Windows and Linux.
Covers downloading and installing Mellanox OFED for Linux on a host machine.
Guide for downloading and installing Mellanox WinOF-2 driver for Windows.
Demonstrates how to use the mlxup utility to check and update adapter firmware.
Provides common troubleshooting steps for adapter card issues.
Lists commands and procedures for troubleshooting Mellanox adapters in Linux.
Lists commands and procedures for troubleshooting Mellanox adapters in Windows.
Detailed specifications for the MCX555A-ECAT adapter card.
Detailed specifications for the MCX556A-ECAT adapter card.
Detailed specifications for the MCX556A-EDAT adapter card.
Presents airflow requirements for different cable types and adapter models.
Explains the meaning of LED indicators for link status in Ethernet and InfiniBand modes.
Provides mechanical drawings and dimensions for the dual-port adapter cards.
Shows the mechanical drawing and dimensions for the dual-port tall bracket.
To Next Page
