Software Management
Rev. 1.7
41Mellanox Technologies
Step 1. Obtain the LID of the target system. The following instructions use one of the utilities pro-
vided by the installed MFT package. (Other methods are described in the MFT User Man-
ual.) by performing the following:
Step a. Mark the GUID printed on the inventory pull-out tab of the system.
Step b. Run the command ibnetdiscover and search for the row starting with the word "Switch" and
indicates the GUID of the system.
Step c. Mark the displayed LID on that row (a decimal number).
Step 2. Run the following command from a host
For further information, please refer to MFT User Manual: http://www.mellanox.com/pdf/MFT/
MFT_user_manual.pdf.
# flint -d <device> q#
To Next Page
Loading...
