Why is the Bad Port LED lighting up on my Mellanox Technologies Switch?
The Bad Port LED may light up because a symbol error is detected on one of the ports. To resolve this, check the connections and functionality of the ports.
General| Brand | Mellanox Technologies |
|---|---|
| Model | SN2700 |
| Category | Switch |
| Language | English |
Provides a general description of Mellanox Spectrum™ based 1U switch systems.
Lists the ordering part numbers (OPNs) and their descriptions for available systems.
Lists critical safety warnings and references for installation procedures.
Covers essential installation steps like airflow, mounting, cabling, power on, and bring-up.
Describes how to upgrade software for MLNX-OS systems.
Describes how to upgrade software for Cumulus Linux systems.
Lists and describes the supported interfaces like Ethernet, RJ45, USB, and Console.
Explains the system's LEDs, their meanings, and troubleshooting information.
Provides a table of common problems, symptoms, and corrective measures for troubleshooting.
Details the mechanical, environmental, and power specifications for the SN2700 and SN2410 series.
Specific notices for Nordic countries related to equipment installation.
Essential safety warnings for installation provided in English.
Safety warnings for installation provided in Hebrew.
Safety warnings for installation provided in Chinese.
Safety warnings for installation provided in French.
Safety warnings for installation provided in German.
Safety warnings for installation provided in Spanish.
Safety warnings for installation provided in Russian.
Safety warnings for installation provided in Romanian.
Safety warnings for installation provided in Croatian.
Safety warnings for installation provided in Italian.
Safety warnings for installation provided in Turkish.
Statement regarding VCCI compliance for equipment used in Japan.
To Next Page