What to do if PSU Status LED is red on Mellanox Technologies Spectrum SN2010 Switch?
If the PSU Status LED on your Mellanox Technologies Switch is red, it could indicate a possible PSU issue. First, check or replace the power cable. If that doesn't resolve the problem, you may need to replace the PSU, which is possible in SN2700, SN2740, and SN2410 models.
What to do if Fan Status LED is red on Mellanox Technologies Switch?
If the Fan Status LED is red on your Mellanox Technologies Switch, there may be a fan issue. Check that the fan is fully inserted and that nothing is blocking the airflow. If the issue persists, consider replacing the fan FRU, which is possible in SN2700, SN2740, and SN2410 models.
Why is the System Status LED red on Mellanox Technologies Switch?
A red System Status LED on a Mellanox Technologies Switch indicates a critical system fault, such as a CPU error or bad firmware, or over temperature. Check the environmental conditions, especially the room temperature, to address this issue.
Why is the System Status LED blinking for more than 5 minutes on Mellanox Technologies Spectrum SN2010?
If the System Status LED on your Mellanox Technologies Switch is blinking for more than 5 minutes, it indicates that the Mellanox Onyx (MLNX-OS) software did not boot properly and only the firmware is running. Connect to the system via the console port and check the software status.
General| Manufacturer | Mellanox Technologies |
|---|---|
| Model | SN2010 |
| Product Series | Spectrum |
| Latency | 300ns |
| Form Factor | 1U |
| Port Speed | 10/25/40/50/100 GbE |
| Power Consumption | 150 W |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% non-condensing |
Provides a general introduction to the Mellanox SN2000 Spectrum™ switch systems.
Details part numbers and options for available Mellanox SN2000 systems.
Crucial safety precautions to be followed before and during installation.
Steps for installing and initializing the Mellanox switch system.
Describes various methods for mounting the switch systems in a 19-inch rack.
Guidelines and procedures for connecting cables to the switch systems.
Instructions for replacing Field Replaceable Units (FRUs) like power supplies and fans.
Lists the various types of interfaces supported by the Mellanox switch systems.
Explains the function and status of system LEDs for monitoring and troubleshooting.
Procedures for updating the system's software and firmware.
Provides guidance for diagnosing and resolving common system issues.
Detailed technical specifications for the SN2700 series switches.
Detailed technical specifications for the SN2100 series switches.
Lists available accessories and replacement parts for the systems.
Instructions on how to safely disassemble and dispose of the equipment.
Comprehensive safety warnings presented in various languages.
To Next Page
