To Next Page
J
Julie SotoJul 30, 2025
Why is the Bad Port LED lighting up on my Mellanox Technologies Switch?
- PPatricia WrightJul 30, 2025
The Bad Port LED lights up on your Mellanox Technologies Switch because a symbol error was detected on one of the ports.
Why is the Bad Port LED lighting up on my Mellanox Technologies Switch?
The Bad Port LED lights up on your Mellanox Technologies Switch because a symbol error was detected on one of the ports.
General| Port Speed | 100 GbE |
|---|---|
| Switching Capacity | 3.2 Tbps |
| Forwarding Rate | 2.38 Bpps |
| Latency | 300ns |
| Form Factor | 1U |
| Management | SNMP |
| Power Supply | AC or DC |
Details about port speeds and switching capabilities of the systems.
General safety precautions for installation.
Steps for installing and initializing the system.
Procedures for bringing the system online.
Initial network configuration steps for MLNX-OS.
Initial network configuration for Cumulus Linux.
Instructions for replacing power supply units.
Instructions for replacing fan modules.
Explanation of system and port status LEDs.
Detailed explanation of the System Status LED.
Detailed explanation of the Fan Status LED.
Detailed explanation of PSU status LEDs.
Procedures for updating system software and firmware.
Steps for upgrading MLNX-OS.
Steps for upgrading Cumulus Linux.
Guide to resolving common issues.
General safety precautions for installation in English.
