Interfaces Rev 1.6
Mellanox Technologies
55
3.2.1.2 Fan Status LED
Figure 55: Fan Status LED in SN2700 - Front and Rear Sides
Figure 56: Fan Status LED in SN2410 - Front and Rear Sides
Table 15 - System Status LED Assignments
LED Behavior Description Action Required
Solid Green The system is up and running nor-
mally.
N/A
Flashing Green The system is booting up. Wait up to five minutes for the end of the
booting process.
Solid Red Major error has occurred. For exam-
ple, corrupted firmware, system is
overheated etc.
If the System Status LED shows red five
minutes after starting the system, unplug the
system and call your Mellanox representa
-
tive for assistance.
Both of these LEDs in the red
ovals show the fans’ status.
Both of these LEDs in the red ovals
show the fans’ status.
To Next Page
Loading...
