Mellanox Technologies SN2100 - Figure 46: System Status Leds 5 Minutes after Power on in SN2700; Figure 47: System Status Leds 5 Minutes after Power on in SN 2410; Figure 48: System Status Leds 5 Minutes after Power on in SN 2100

Installation Rev 1.6
Mellanox Technologies
41
Step 4. Check the System Status LEDs and confirm that all of the LEDs show status lights consistent
with normal operation (initially flashing, and then moving to a steady color) as shown in
Figure 46 below. For more information, refer to “LEDs”.
Figure 46: System Status LEDs 5 Minutes After Power On in SN2700
Figure 47: System Status LEDs 5 Minutes After Power On in SN 2410
Figure 48: System Status LEDs 5 Minutes After Power On in SN 2100