Mellerware Mmmm! - Self-Cleaning Process Details; System Functions and Rinsing; Empty System Function: Purpose, Activation, and Post-Use; Performing Manual Rinsing

ES
EN
In standby mode, press and hold
ON/OFF Button (G) and strong
coee button (I) at the same time,
for 5 seconds. There will be a
“beep” sound and icon (E) and (I)
will be ashing.
Press strong coee button (I) to
conrm the self-cleaning process.
Icon (E) will be ashing, which
indicates that the appliance is
undergoing the self-cleaning
process. To resume back to the
standby mode, press ON/OFF
button (G).
When all the water from the water
tank is being dispensed out, icon
(A) and (I) will be ashing. Fill the
tank with normal tap water until the
MAX position.
When water is lled into the water
tank, icon (A) will turn o. Then,
icon (I) and (E) will be light up
continuously. Then, the appliance
will continue with the descaling
process, the appliance will brew
half of water tank rst and then
waiting for around 1min. After that
it will brew the outstanding water
from the water tank.
When the self-cleaning process
is completed, the appliance will
switch o automatically.
NOTE: To ensure the descaling
process can be completed, please
be patient during the process and
make sure the appliance switches
o automatically
–
–
–
–
–
–
–
–
–
–
–
–
–
EMPTY SYSTEM FUNCTION
The empty system function
is recommended to be used
before long period of non-use,
frost protection and before any
reparation.
On standby mode, press and hold
the ON/OFF button (G) and the
mild coee button (J) during 5
seconds.
Empty system icon (F) will be
ashing.
Remove the water tank from the
appliance. The empty system icon
(F) will turn on steadly, indicating
that the empty system process is
running. You can press ON/OFF
(G) button before removing the
water tank to return to the standby
condition.
When the empty system function
is completed, the appliance will
automatically turn o.
IMPORTANT: After performing
EMPTY SYSTEM FUNCTION; when
you use the coee machine again,
press the hot water button (H) until
water come out from the spout.
MANUAL RINSING
You can perform a manual rinsing
cycle to clean the coee nozzle
after use. It is also suggested to
perform a manual rinsing if the
appliance has not been used for a
long period of time.
In standby condition, press and
hold the ON/OFF Button (G) and
hot water button (H) together.