Memjet C6010 - Specifications

C6010 Specifications
5 December 2012 – v1.0
Page 94 of 100
 Specifications
Specifications are subject to change without prior notice.
Printing
Speed
Normal: 60 ppm (1600 x 800 dpi)
1
Best: 30 ppm (1600 x 1600 dpi)
Printhead Cartridge
OST5.1 print head (user replaceable)
Print pipeline
hardware
Single OmniPEC
Max dot rate
774 million dots/sec
Single / double sided
printing
Single sided (simplex)
Manual (SW duplex)
Software
Supported Windows
Operating Systems
2
Hybrid Host Based Driver supports popular
Windows™ and Mac™ operating systems.
SNMP
SNMPv2c
Fonts
Page rendering using host computer fonts
Hardware
CPU
Two 32-bit ARM processors
RAM
64 MB SDRAM
Printer Connectivity
USB
USB 2.0 Hi speed with type B connector
USB (Device)
1 × Device port for host connection
LAN (wired)
100 Base – TX Ethernet 100 (802.3 u)
User Interface
Input/Output/
Toolbox
Status information via printer driver
Embedded web server
Mac and Windows tool box
Full MS certification
Front Panel
2 line LCD Graphic type Panel with
language customization.
Power on, Menu, Menu Up/Down, Resume,
Job Cancel buttons
Ink and Paper
Ink tanks
4 ink tanks - CMYK
50ml per tank (color), single 100ml (black)
Refillable through OEM authorized refill
systems
Ink
Dye based
Ink dry time
Less than 1 second Paper dry to the touch
before leaving printer
Ink replenishment
Individual ink tank replacement
Paper sizes
Tray1: A4, US Letter and US Legal
Tray 2: 6” x 4” to US Legal
Paper types
Plain paper, glossy and matte microporous
coated inkjet paper
Paper weight
Tray 1: 70 to 120 gsm (19 lb to 32 lb)
Tray 2: 70 to 240 gsm (19 lb to 75 lb)
Paper tray
Tray 1: 250 sheets 70 gsm (19 lb)
Tray 2: 20 sheets 70 gsm (19lb)
Output paper tray
125 sheets
Face-up, correct order
Environmental
Operational
Temperature
15 °C to 30 °C (59 °F to 86 °F)
Recommended.
10°C to 35 °C (50 °F to 95 °F) Max.
Operational performance is not guaranteed
Humidity
20 % to 80 % RH non-condensing
Atmospheric pressure
70 kPa to 106 kPa
Storage and Shipping
Temperature
-25°C to 50°C (-13 °F to 122°F) (Short term
up to 3 weeks.)
+5°C to +35°C (+41°F to 95° F) (Long
Term).
Humidity
5 % to 95 % RH non-condensing
Atmospheric pressure
70 kPa to 106 kPa
Other
Power Consumption
110 VAC/60 Hz
220 VAC/50 Hz
OFF: <0.5 W OFF: <0.5 W
Idle: 6.1 W Idle: 6.1 W
Printing: 40 W* Printing: 40 W*
Power Supply
External power adaptor
110-240 VAC 50/60 Hz 120 Watts
Weight
12.8 kg (17 kg with packing)
Dimensions
542 w x 265 h x 455 d (mm)
*Based on normal office printing.
1
Document content, specific application printing techniques, lower end computers and network bandwidth limitations
may all prevent maximum print speed from being achieved.
2
All Host Operating Systems should be updated to the latest Service Pack unless otherwise specified. JavaScript must be
enabled in your browser.