Need help?Do you have a question about the Memmert IPP 110 and is the answer not in the manual?
Details potential hazards and safety precautions for the appliance.
Outlines qualifications and supervision needed for operators.
Defines the owner's duties regarding appliance condition and personnel.
Specifies the appliance's intended applications and limitations.
Warns against unauthorized modifications and their consequences.
Explains how to perform an emergency shutdown.
Covers voltage, protection class, fuses, and interference suppression.
Explains electrical connection requirements and Ethernet interface.
Provides dimensions, weight, power, and load capacities.
Warns about risks during transport and installation and required PPE.
Provides guidelines for positioning and clearances around the appliance.
Instructions on connecting the power cable to the appliance and supply.
Provides warnings and cautions regarding chamber loading.
Describes the electronic and mechanical overtemperature protection.
Explains displayed messages like "max" and "TB" alarms.
Guides on setting the trigger temperature for alarms.
Introduces temperature calibration procedures.
Provides step-by-step instructions for calibrating temperature.
Details potential hazards and safety precautions for the appliance.
Outlines qualifications and supervision needed for operators.
Defines the owner's duties regarding appliance condition and personnel.
Specifies the appliance's intended applications and limitations.
Warns against unauthorized modifications and their consequences.
Explains how to perform an emergency shutdown.
Covers voltage, protection class, fuses, and interference suppression.
Explains electrical connection requirements and Ethernet interface.
Provides dimensions, weight, power, and load capacities.
Warns about risks during transport and installation and required PPE.
Provides guidelines for positioning and clearances around the appliance.
Instructions on connecting the power cable to the appliance and supply.
Provides warnings and cautions regarding chamber loading.
Describes the electronic and mechanical overtemperature protection.
Explains displayed messages like "max" and "TB" alarms.
Guides on setting the trigger temperature for alarms.
Introduces temperature calibration procedures.
Provides step-by-step instructions for calibrating temperature.
General| Setting accuracy temperature | ±0.1 °C |
|---|---|
| Voltage | 230 V, 50/60 Hz |
| Weight | 60 kg |
| Interior | Stainless steel |
| Controller | Digital |
| Interfaces | USB |
| Interior volume | 110 liters |
To Next Page
