Memmert IPP 110 - Ending Appliance Operation

24
Operation and control
5.5.3 Function
If temperature monitoring has been
triggered, this is indicated by the tem-
perature display: the actual temperature
is highlighted in red and a
warning
symbol is shown ( Fig. 15 ). The type of
temperature monitoring triggered is
shown beneath the temperature.
max
for electronic and
TB for mechanical
temperature limiting. Additionally, the
alarm is signalled by an intermittent
acoustic signal. Information on what to
do in this case is provided in the chapter
“Malfunctions, warning and error mes-
sages” on page 25.
5.6 Ending operation
1. Switch off active appliance functions
(turn down the heating).
2. Remove the chamber load.
3. Switch off the appliance with the
main switch (Fig. 16).
4m
FEUCHTE
30.0%rh
Set 30.0%rh
22
0
TEMP
°C
°C
°C22.4
TEMP
°CSet 37.0
TIMER
30m04h
Ende
23.Nov 13:30
°C
TEMP
max Set 38.5 °C
38.9
TIMER
FE
22.4
37.0
TEMP
Set
°C
°C
°C22.4
TEMP
°CSet 37.0
TIMER
°C
TEMP
max Set 38.5 °C
38.9
LICHT
%
100
Fig. 15
Temperature monitoring triggered
ON
O
O
ON
N
N
N
O
O
N
O
Fig. 16 Switch off appliance