Need help?Do you have a question about the Memmert INCO 246 med and is the answer not in the manual?
Details potential dangers associated with the incubator's operation and handling to prevent injury.
Specifies the legal age, training, and supervision requirements for operating the incubator safely.
Outlines the owner's obligations regarding incubator condition, personnel training, and safety compliance.
Provides step-by-step instructions for dealing with accidents, including gas exposure and contact with substances.
Details the process for safely switching off the incubator in emergency situations.
Emphasizes safety measures during transport and installation to prevent injuries and damage.
Outlines essential checks, connections for power, water, and gas before initial use.
Explains how to set parameters and select operating modes like normal, time switch, or interface control.
Details specific error messages for temperature and humidity systems, including causes and remedies.
Covers error messages related to CO₂ and O₂ supply issues, along with troubleshooting steps.
Explains temperature monitoring, limit settings (TB, TWW), and automatic monitoring (ASF) for safety.
Guides on calibrating temperature, humidity, and CO₂ sensors to ensure measurement accuracy.
General| Category | Accessories |
|---|---|
| Model | INCO 246 med |
| Brand | Memmert |
| Temperature Fluctuation | ±0.1°C |
| Power Supply | 230 V, 50/60 Hz |
| Type | Incubator |
| Temperature Uniformity | ±0.3°C at 37°C |
| Interior Volume | 246 L |
| CO2 Range | 0 - 20% |
| O2 Range | 1 - 21% |
To Next Page
