Do you have a question about the Memmert INCO 108 and is the answer not in the manual?
Details potential dangers associated with the incubator, even during intended use.
Specifies personnel qualifications and owner's duties for safe operation.
Provides emergency shutdown and accident response guidance.
Explains the heating, gas introduction, and ventilation systems within the incubator.
Presents detailed technical data including dimensions, performance, temperature, and humidity ranges.
Covers essential pre-operation checks, including temperature sensor and door.
Details appliance startup and the general method for setting parameters.
Guides on setting temperature, humidity, and CO₂ setpoints in normal mode.
Lists common warning messages displayed and their remedies.
Covers general system errors and safety warnings related to internal malfunctions.
Describes monitoring functions to protect the incubator and its contents.
Details potential dangers associated with the incubator, even during intended use.
Specifies personnel qualifications and owner's duties for safe operation.
Provides emergency shutdown and accident response guidance.
Explains the heating, gas introduction, and ventilation systems within the incubator.
Presents detailed technical data including dimensions, performance, temperature, and humidity ranges.
Covers essential pre-operation checks, including temperature sensor and door.
Details appliance startup and the general method for setting parameters.
Guides on setting temperature, humidity, and CO₂ setpoints in normal mode.
Lists common warning messages displayed and their remedies.
Covers general system errors and safety warnings related to internal malfunctions.
Describes monitoring functions to protect the incubator and its contents.
| Interior Volume | 108 liters |
|---|---|
| Temperature Range | ambient +5°C to 70°C |
| Power supply | 230 V, 50/60 Hz |
| Humidity Control Range | Not applicable |
| CO2 Control Range | 0 to 20 % CO2 |
| Temperature uniformity | ±0.3°C at 37°C |