Need help?Do you have a question about the Memmert INCO 153 and is the answer not in the manual?
Details potential hazards associated with using the incubators, including electrical and gas risks.
Specifies qualifications and training needed for operating and maintaining the incubator.
Provides immediate actions for accidents like CO2 exposure, including first aid and medical attention.
Details how to safely shut down the incubator during an emergency situation.
Defines the proper use of incubators for cell cultures and prohibits other applications like drying or sterilisation.
Presents detailed technical specifications for different INCO models, including dimensions, performance, and environmental controls.
Warns about injuries during transport and installation, emphasizing protective gear and proper handling.
Guides on positioning the incubator correctly, ensuring levelness and adequate clearance from walls.
Covers connecting the power supply, external devices, and water supply for humidity models.
Reiterates requirements for qualified personnel to operate the incubator safely.
Provides critical warnings and guidelines for safely loading the chamber with appropriate materials.
Details the process for connecting gas bottles, including checking connections and opening valves.
Introduces the operating panel and how parameters are displayed and entered.
Outlines the general method for setting various parameters using the push-turn control and SET key.
Provides steps for safely shutting down the incubator and preparing it for storage or next use.
Explains the system for monitoring temperature, including mechanical and electronic limits and alarms.
Provides instructions for customer-specific calibration of temperature, humidity, and CO2 levels.
Details potential hazards associated with using the incubators, including electrical and gas risks.
Specifies qualifications and training needed for operating and maintaining the incubator.
Provides immediate actions for accidents like CO2 exposure, including first aid and medical attention.
Details how to safely shut down the incubator during an emergency situation.
Defines the proper use of incubators for cell cultures and prohibits other applications like drying or sterilisation.
Presents detailed technical specifications for different INCO models, including dimensions, performance, and environmental controls.
Warns about injuries during transport and installation, emphasizing protective gear and proper handling.
Guides on positioning the incubator correctly, ensuring levelness and adequate clearance from walls.
Covers connecting the power supply, external devices, and water supply for humidity models.
Reiterates requirements for qualified personnel to operate the incubator safely.
Provides critical warnings and guidelines for safely loading the chamber with appropriate materials.
Details the process for connecting gas bottles, including checking connections and opening valves.
Introduces the operating panel and how parameters are displayed and entered.
Outlines the general method for setting various parameters using the push-turn control and SET key.
Provides steps for safely shutting down the incubator and preparing it for storage or next use.
Explains the system for monitoring temperature, including mechanical and electronic limits and alarms.
Provides instructions for customer-specific calibration of temperature, humidity, and CO2 levels.
General| Category | Accessories |
|---|---|
| Temperature stability | ±0.1°C |
| Power supply | 230 V, 50/60 Hz |
| Suitable for | Incubation |
| Temperature uniformity | ±0.3 °C at 37 °C |
To Next Page
