Need help?Do you have a question about the Memmert Waterbath WNB 7-45 and is the answer not in the manual?
Guidelines for safely transporting the waterbath unit.
Details on the stainless steel used for the waterbath casing and interior.
Information on voltage, protection class, and electrical safety features.
Guidance regarding electromagnetic compatibility requirements.
Overview of the waterbath's electronic control and measurement systems.
List of features and components included as standard with the waterbath.
Instructions for the first-time startup and supervision of the waterbath.
Procedure for filling, draining, and initial operation of the waterbath.
Description of the control panel, display symbols, and buttons.
How to turn the waterbath on and off using the control panel.
Procedure for selecting and adjusting operational parameters.
How to set and adjust the desired operating temperature.
Configuring a delayed start time for the waterbath operation.
Setting a duration for maintaining the target temperature.
Details on the built-in safety temperature limiter.
Functionality and response of the low-level liquid protection.
Operation and fault indication of the monitor relay system.
General| Model | WNB 7-45 |
|---|---|
| Temperature Stability | ± 0.1 °C |
| Volume | 7 liters |
| Power Supply | 230 V, 50/60 Hz |
| Heating Power | 800 W |
| Temperature Sensor | PT 100 |
| Material (Interior) | Stainless steel |
| Display | LED |
| Tank Material | Stainless steel |
| Temperature Range | 5 °C above ambient temperature to 99.9 °C |
| Control | Microprocessor controller |
| Timer | 0 - 99 hours |
| Material (Exterior) | Stainless steel |
To Next Page
