Document No.: M0-0001-4504-1
Effective: 4-Dec-2009
Version: D
Page: - 12 -
You need to “Disable” your password first before you can use this “Configure
Size” (resizing) function if you have already setup a password. Follow section
E3 of this manual to disable your password. It may be necessary to remove and
plug your device in again after disabling the password.
A warning message will show, telling you that data will be destroyed. If you have
not yet backed up your data. Press
(cancel) to cancel the operation and back
up your data first; otherwise, press
(apply) to continue.
To Next Page
Loading...