EasyManua.ls Logo

Memorex MB2186 - VAS Recording Details and Notes

Memorex MB2186
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Press the Stop/Eject button and
insert a microcassette tape with
the side to be played facing you
and the exposed tape facing the
right. Close the Cassette
Compartment.
1
For Voice Activated Recording,
slide the VAS ON/OFF switch
to the ON position and press the
REC button (the PLAY button
will automatically depress).
1
2
2
VOICE ACTIVATED (VAS) RECORDING
Speak into the built-in
microphone or insert a
microphone into the MIC jack and
speak into it in a normal tone of
voice. Adjust the VOLUME/VAC
Mic Sensitivity control until your
voice activates the recorder
(REC/BATT indicator will light).
3
NOTES:
The first few sounds activate
the recorder and may not be
recorded.
A variation in voice level during
recording will not stop the unit,
2 seconds of silence is
required to stop the recording.
For constant recording, see
previous page.
When recording, the VOLUME/
VAC Mic Sensitivity control
adjusts the microphone
sensitivity. At 10, a soft sound
will activate the recorder. At 0,
a louder sound is required.
OPERATION
Voice activated recording will allow dictation only when you
speak. When the unit detects a pause of a few seconds, it will
temporarily stop recording until it detects sound again.
MB2186 O/M.QXD 8/12/02 11:22 AM Page 8

Related product manuals