7
Press the Stop/Eject button and
insert a microcassette tape with
the side to be played facing you
and the exposed tape facing the
right (and the Erase Prevention
Tab intact, see note below).
Close the Cassette Compartment.
1
Slide the TAPE SPEED switch to
the desired tape speed.
2
NORMAL RECORDING
For constant recording, slide the
VAS ON/OFF switch ❶ to the
OFF position and press the REC
button ❷ (the PLAY button will
automatically depress) and the
REC/BATT indicator will light.
3
Speak into the built-in microphone
or insert a microphone into the
MIC jack and speak into it in a
normal tone of voice.
4
OPERATION
This unit is capable of recording only when sound is heard. To use this
feature, see the next page. For normal recording, follow steps below.
IMPORTANT NOTE: If you cannot press the REC button, then
there is either no tape inserted, or the erase prevention tab has
been removed. See page 9 for details.
To Next Page
Loading...
Need help?
General
