12
OPERATION
With an iPod connected (see
previous page), turn this unit on by
pressing the Power button; the
display will show briefly “Hello” and
the backlight will light blue.
1
If you are not already in iPod
mode, press the FUNCTION
button to select iPod mode. You
can operate the iPod using its own
controls, as per its owner’s
manual, and the sound will be
heard through this unit’s speakers.
2
USING AN iPod WITH THIS UNIT
To play/pause/stop the iPod:
Press the Play/Pause (®p)
button 1 to start playback on your
iPod. Press again to pause
playback and press yet again to
resume playback. To completely
stop playback (and turn off the
iPod), press the STOP/BAND (
■)
button
2.
3
To skip forward or backward on
the iPod: Press the Tune/Skip/
Time Down (-) 1 or Up (+) 2
button to skip to the beginning of
the current track/previous or
next track.
To search forward or backward
on the iPod: Press and hold the
Tune/Skip/Time Down (-) 1 or Up
(+)
2 button to search within the
currently-playing track.
4
NOTES:
• Once you turn on this unit, the iPod will be in Pause mode.
• See the next page for how to adjust the volume.
• To turn this unit off, press the Power button; the display will show briefly
“Good Bye” and the display will show the actual time again.
To Next Page
Loading...
Need help?
General
