Memorex Mi1111 - Micro System - Page 21

20
OPERATION (CONTINUED)
While in the Stop mode, press the
PROG./MEMO./Clock Set button.
“MEM”, the track number and
“P-01” (the program number) will
appear in the display. (The
directory number will also blink if
using a MP3 disc.)
1
2
1
Select a track to be programmed
using the Tune/Skip/Time Down
(-) 1 or Up (+) 2 button. If using a
MP3 disc, see note below.
1
2
2
TO PROGRAM THE MEMORY (UP TO 64 TRACKS)
Programming is the ability to preselect the order in which a series of tracks
will be played.
Press the PROG./MEMO./Clock
Set button to memorize the track.
Repeat Steps 2 and 3 to program
additional tracks up to a maximum
of 64 tracks.
1
2
3
Press the Play/Pause (®p)
button to begin program playback.
2
4
NOTES:
• To clear the memory, while in the Stop mode, press the PROG./MEMO./Clock
Set button followed by the STOP/BAND (■) button.
• MP3: If an MP3 disc is inserted, you will first select the directory number in
Step 2 followed by the PROG./MEMO./Clock Set button, and then the
file/track number.
SEE NEXT PAGE FOR MORE NOTES ON PROGRAMMING THE MEMORY.