Why doesn't my Memorex Clock Radio alarm turn on?
If the Memorex Clock Radio alarm doesn't turn on, make sure the ON/OFF/AUTO/BUZZ switch is set to the AUTO or BUZZ position. Also, verify that the clock and alarm time are correctly set.
How to fix a Memorex Clock Radio that won't turn on?
If your Memorex Clock Radio doesn't power on, the AC line cord might not be properly plugged in. Ensure the plug is firmly inserted into the AC outlet.
What to do if my Memorex MSP-CR1100 has no sound?
If there is no sound coming from your Memorex Clock Radio, check the following: 1. Ensure the ON/OFF/AUTO/BUZZ switch is set to the ON position. 2. Increase the VOLUME, as it might be at the minimum position.
Why is the time flashing on my Memorex MSP-CR1100?
If the time is flashing on your Memorex Clock Radio, check the battery. It may be connected improperly, not connected, or dead. Also, ensure that the clock is properly set.
How to improve sound quality on Memorex Clock Radio?
If you are experiencing noise or distorted sound on AM or FM on your Memorex Clock Radio: * For AM, try turning the radio for better reception, as the interference may be caused by traffic. * For FM, extend the antenna wire.
General| Brand | Memorex |
|---|---|
| Model | MSP-CR1100 |
| Category | Clock Radio |
| Language | English |
Warning against removing covers to reduce the risk of electric shock.
Alert about uninsulated dangerous voltage present within the product's enclosure.
Advises referring to the owner's manual for important operating and maintenance instructions.
Warns of hazardous laser radiation when open and advises avoiding direct beam exposure.
Alerts about potential radio frequency energy generation and modification risks.
Notes the unit employs a laser, requiring qualified service personnel for safety.
Emphasizes reading, heeding, and retaining all safety and operating instructions.
Advises unplugging before cleaning and using only manufacturer-recommended attachments.
Warns against using near water and placing on unstable surfaces or blocking ventilation.
Covers operating from specified sources and polarized plug safety.
Advises routing cords safely and unplugging during storms to prevent surges.
Warns about contact with power lines and overloading outlets.
Discourages inserting objects, spilling liquids, and performing self-servicing.
Specifies using manufacturer-approved parts and performing safety checks after service.
Covers wall/ceiling mounting and conditions requiring qualified service.
Advises placement away from heat, proper CATV grounding, and unplugging during nonuse.
Identifies front panel controls including SLEEP, Snooze, Display, Indicators, TUNING, VOLUME, and AM/FM controls.
Identifies bottom panel controls including ON/OFF/AUTO/BUZZ, ALARM SET/AL. OFF, TIME SET, HOUR, and MIN buttons.
Identifies back panel components: Battery Compartment, FM Antenna Wire, and AC Cord.
Instructions for connecting the AC cord to a 120V outlet and handling nonpolarized outlets.
Guidance on installing a 9V battery for internal clock operation during power failure.
Precautions for using batteries, including correct polarity, removal during nonuse, and recharging.
Steps to turn on the unit, select AM/FM, tune stations, and adjust volume.
Procedure for setting the current hour and minute, noting PM indicator.
Instructions for setting the desired alarm hour and minute.
Steps to set the alarm to wake to a radio station, including volume adjustment.
Instructions for setting the alarm to wake to a buzzer sound.
Methods to turn off the alarm and reset it for the next day or disable it.
How to temporarily silence the alarm by pressing the Snooze button.
Procedure to set the unit to turn off automatically after a specified sleep time.
Solutions for power not coming on, including checking the AC cord and switch.
Solutions for no sound or distorted sound on AM/FM, including antenna and volume checks.
Solutions for flashing time and alarm not turning on, involving battery and setting checks.
Details the frequency ranges for AM and FM radio.
Details the power supply requirements, including AC voltage and battery backup.
To Next Page
