Why doesn't my Memorex Clock Radio alarm turn on?
If the Memorex Clock Radio alarm doesn't turn on, make sure the ON/OFF/AUTO/BUZZ switch is set to the AUTO or BUZZ position. Also, verify that the clock and alarm time are correctly set.
How to fix a Memorex Clock Radio that won't turn on?
If your Memorex Clock Radio doesn't power on, the AC line cord might not be properly plugged in. Ensure the plug is firmly inserted into the AC outlet.
What to do if my Memorex MSP-CR1100 has no sound?
If there is no sound coming from your Memorex Clock Radio, check the following: 1. Ensure the ON/OFF/AUTO/BUZZ switch is set to the ON position. 2. Increase the VOLUME, as it might be at the minimum position.
Why is the time flashing on my Memorex MSP-CR1100?
If the time is flashing on your Memorex Clock Radio, check the battery. It may be connected improperly, not connected, or dead. Also, ensure that the clock is properly set.
How to improve sound quality on Memorex Clock Radio?
If you are experiencing noise or distorted sound on AM or FM on your Memorex Clock Radio: * For AM, try turning the radio for better reception, as the interference may be caused by traffic. * For FM, extend the antenna wire.
General| Brand | Memorex |
|---|---|
| Model | MSP-CR1100 |
| Category | Clock Radio |
| Language | English |
