- 1 -
FEATURES
w On-screen graphics guide you through setup features and operations
w Automatic programming of channels allows easy selection of stations available in your viewing
area
w Sleep timer programs the TV to turn itself off at a preset time
w One day timer programs the TV to come on once at a preset time
w Weekly timer programs the TV to come on at a preset time every day
w 26 button infrared remote control allows remote operation
w VHF/UHF/CATV tuning allows reception of standard broadcasts or cable TV channels
w Closed caption decoder displays captions or half-screen text
w V-Block function
SPECIFICATIONS
AC Power Input: 120V, 60Hz
AC Power Consumption: 77Watts
Chassis Construction: IC Solid State
Picture Tube: 13” ( measured diagonally )
Speaker: 3.5 x 2 in (90 x 50 mm) Oval, 8 ohms
Tuner: 181 Channel, Freq. Synthesized
Remote Control: Infrared, Direct Access
26 Key, 2 “AA” batteries
Receiving Channels:
VHF 2 - 13
UHF 14 - 69
CATV
Mid Band 14 - 22
Super Band 23 - 36
Hyper Band 37 - 65
Ultra Band 66 - 94, 100 - 125
Sub Mid Band 1, 95 - 99
Cabinet: Monitor Style
Antenna Input Impedance 75 ohm (VHF/UHF) Coaxial Input
CAUTION:
• In case you forget the V-Block Pass Number, reset using the Service Remote
Control. At the Pass Number entry screen, while holding down the [SHIFT] button
press the [Q.REV] button repeatedly four times. The display will change from “????”
to “!!!!”. Release the [SHIFT] button and then press the [MENU] button. V-Block
screen will be display.
• To prevent electric shock, match wide blade of plug to wide slot, fully insert .
To Next Page
Loading...