15
SETUP MENU (CONTINUED)
NTSC: Select when using an NTSC TV.
PAL: Select when using a PAL TV.
IMPORTANT: In the USA, the standard is NTSC. When the
DVD player is turned on, it will be set to NTSC.
TV TYPE
SYSTEM SETUP
SCREEN SAVER
TV SYSTEM
NTSC
PAL
PAS
SWORD
RATING
DEFAULT
EXIT SETUP
1
When this option is set to ON, the screen saver will come on
when the unit stops for approximately three minutes.
When this option is OFF, the screen saver will not come on.
TV TYPE
SYSTEM SETUP
SCREEN SAVER
TV SYSTEM
ON
OFF
PASSWORD
RATING
DEFAULT
EXIT SETUP
1
GENERAL SETUP MENU:
Select SYSTEM SETUP using the Navigation (Ã,¨) buttons, then select/change the setup option as described on page 14.
TV TYPE
SCREEN SAVER
4:3PS: Select when the unit is connected to a conventional TV.
Video material formatted in the Pan Scan style is played back in
that style (the left and right edges are cut off).
4:3LB: Select when the unit is connected to a normal
TV
.
Wide-screen images are shown on the screen with a black
band at the top or bottom.
16:9: Select when the unit is connected to a wide-screen
TV
.
TV TYPE
SYSTEM SETUP
SCREEN SAVER
TV SYSTEMTV SYSTEM
4:3PS
4:3LB
16:9
PASSWORD
RATING
DEFAULT
EXIT SETUP
1
Select DEFAULT, then press the Navigation ¨ button to
highlight RESTORE. Press the ENTER button to restore the
DVD to its factory settings.
TV TYPE
SYSTEM SETUP
SCREEN SAVER
TV SYSTEMTV SYSTEM
RESTORE
PASSWORD
RATING
DEFAULT
EXIT SETUP
1
TV SYSTEM
DEFAULT
To Next Page
Loading...
Need help?
General
