Memorex MX4137 - Radio Presets Management; Storing Radio Presets; Recalling Saved Radio Presets

11
OPERATING INSTRUCTIONS (CONTINUED)
Press the POWER button to turn
the unit on.
2
1
Press the MEM/CLOCK ADJ
button 1; the preset number will
appear in the display. Press the
REPEAT/MEM-UP 2 or
RANDOM/MEM-DN
3 button until
the desired memory number
appears on the display.
2
1
3
4
Press the Tune/Skip/Search o 1
or n 2 button to select a station.
2
1
3
Press the TUNER Function button
1 to select the radio. (You can
also repeatedly press the
FUNCTION button on the remote
to select the tuner.)
Press the STOP/BAND (
■) button
2 to select AM or FM.
1
2
2
Press the MEM/CLOCK ADJ
button again to set the station in
the selected memory.
1
5
Repeat steps 3 through 5 to
program up to 10 stations in each
band, if desired.
In case the main power supply
is interrupted, the memory
presets will be erased.
6
SETTING RADIO PRESETS
T
his unit can preset 10 AM and 10 FM radio stations for convenient recall.
Follow steps 1 and 2 above.
1
Adjust the EQ button ❶ and
VOLUME buttons ❷ (and the X-
BASS button on the remote) as
desired.
1
2
2
3
Press the REPEAT/MEM-UP 1 or
RANDOM/MEM-DN 2 button to select a
preset; the station will automatically be
tuned in.
NOTE: You can also use the Number (0-9)
buttons on the remote to select a preset;
simply press the number for the preset you
would like to hear (for “10”, press “0”).
1
2
2
RECALLING RADIO PRESETS (10 EACH BAND)