Memorex MX4137 - Compact Disc Playback Basics; Playing and Controlling CDs; CD Pause and Resume Functionality

12
Press the POWER button to turn
the unit on.
2
1
Press the CD OPEN button and
gently press a CD onto the center
spindle with the label side facing
forward and close the CD
compartment.
NOTE: 3 inch single or standard
CDs can be used with this unit.
2
3
Press the CD Function button;
“CD” appears in the display.
NOTE: You can also repeatedly
press the FUNCTION button on
the remote to select CD.
2
2
To stop playback before the disc
ends, press the STOP/BAND (■)
button. The disc will stop and the
display will show the total number
of tracks and playing time on the
disc.
2
6
PLAYING COMPACT DISCS
This unit can play standard, CD-R or CD-RW CDs.
OPERATING INSTRUCTIONS (CONTINUED)
During CD playback, if you wish
to pause the disc momentarily,
press the PLAY/PAUSE (
®p)
button. Playback stops but the
disc continues to spin and the
elapsed time will blink.
1
Press the PLAY/PAUSE (®p)
button again to release pause and
resume normal CD playback.
2
CD PAUSE CONTROL
Press the PLAY/PAUSE (®p)
button to begin playback on
Track 1. Playback will continue
until all the tracks on the disc
have been played.
2
4
Adjust the EQ button ❶ and
VOLUME buttons ❷ (and the X-
BASS button on the remote) as
desired.
1
2
2
5