Page 14
SMART CABLE LED AND ALARM BEHAVIOR
BEHAVIOR REASON
Green LED blinking; Red
LED off; no beep.
Cable is connected to battery
only.
Cable is connected to jump starter
only.
Green LED solid; Red
LED off; no beep.
Cable is connected correctly to
both battery and jump starter.
Solid Red LED, Green
LED off; beeps once per
second.
Low voltage protection
Solid Red LED, Green
LED off; beeps twice per
second.
Reverse polarity protection
Alternating Red and
Green flashing LEDs; no
beep.
Reverse charging protection
Solid Red LED, Green
LED off; rapid beeping.
Short circuit protection
Solid Red and Green
LEDs; no beep.
Auto shut-off, due to inactivity.
Disconnect and reconnect clamps
to the vehicle battery.
Solid Red and Green
LEDs; beeps once per
second.
Temperature protection
NOTE: When the condition is corrected, the smart cable will
automatically reset.
To Next Page
Loading...