07
MODE: Press the “MODE”key repeatedly to select the desired value (SCAN, SPEED,
TIME, DISTANCE, CALORIES). Hold the key for 3 seconds to have all function values
reset (total reset).
FUNCTIONS AND OPERATIONS:
SCAN: Displays functions automatically in the following order every 6 seconds: TIME,
SPEED, DISTANCE and CALORIES.
TIME(TMR): Displays the total time of the exercise from start to finish.
SPEED(SPD): Displays current speed.
DISTANCE(DST): Displays the distance of the exercise from start to finish.
CALORIES(CAL): Displays the total calories burned during an exercise from start to
finish.
Monitor Instructions
SCAN SPD CAL
TMR DST
To Next Page
Loading...