What to do if the monitor on my Merach MR-E07 Elliptical Trainer has no display?
If the monitor of your Merach Elliptical Trainer isn't displaying anything, try these steps: * Replace the batteries. * Check if the positive and negative battery terminals are installed correctly.
Why won't Bluetooth connect to my Merach MR-E07?
If you're having trouble connecting to your Merach Elliptical Trainer via Bluetooth, consider the following: * Ensure that Bluetooth is enabled on your cell phone. * Make sure the elliptical is disconnected from other devices' Bluetooth connections. * The device can only connect to the APP when in motion; step on the pedals more than twice to activate the Bluetooth.
How do I adjust the resistance knob on my Merach MR-E07 Elliptical Trainer?
To adjust the resistance on your Merach Elliptical Trainer, rotate the knob. Rotate it clockwise to increase the resistance, and counterclockwise to decrease it.
What to do if the handrails on my Merach MR-E07 Elliptical Trainer shake?
If the handrails of your Merach Elliptical Trainer shake slightly, check whether the four bolts connecting the left and right armrests are fixed firmly.
What to do if the pedals are loose on my Merach MR-E07 Elliptical Trainer?
If the pedals on your Merach Elliptical Trainer are loosening, check that the two bolts on each pedal are locked tight.
What to do if my Merach MR-E07 shakes during use?
If your Merach Elliptical Trainer shakes during use, check whether the twelve angles of the two ends of the rear foot pipe are leveled.
Guidelines for maintaining the elliptical machine to ensure longevity and safety.
Attaching front and rear foot tubes to the main frame.
Connecting and securing the handlebar post to the elliptical machine.
Steps to attach left and right pedals to their respective connecting tubes.
Procedure for installing left and right handrails onto the machine's rockers.
Details on connecting pedal tubes to the main frame using bolts and washers.
Instructions for attaching the middle handrail, including routing wires.
Final assembly steps for mounting the monitor and bottle cage.
How to adjust the resistance level using the control knob.
Instructions for adjusting rear foot tubes for machine stability.
Guidance on how to move the elliptical machine using the handrails.
Steps for installing batteries into the monitor unit.
Explanation of the purpose of each button on the monitor.
How to use the monitor's functions: Scan, Time, Speed, Distance, ODO, Calories, Pulse.
Procedure for measuring heart rate using the monitor's contact pads.
Technical specifications and operating details for the monitor display.
Information on extending warranty and procedures for defective products and returns.
General| Brand | Merach |
|---|---|
| Model | MR-E07 |
| Category | Elliptical Trainer |
| Language | English |
To Next Page