Merach MR-S19 - Install the Seat Set to the Main Frame

Step3:InstalltheSeatSettotheMainFrame
A.AttachtheBackrestSupport(#18)totheseatsliderontheMainFrame(#8)withPanHead
HexagonSocketFullToothScrews(#11),Nuts(#13)andBolts(#12)fromthebottomeofthes
eatslider.AndthentightenitwithOpenSpanner(#D).
Note:Pleaseunscrewthepre-assembled1PanHeadHexagonSocketFullToothScrews(#12)
fromtheBackrestSupport(#18)firstly.
B.ConnecttheHandleWire(#27)totheHandleChipTrunk(#28).
07
AssemblyInstructions