Need help?Do you have a question about the Meraki MR16 and is the answer not in the manual?
General| Model | MR16 |
|---|---|
| Category | Wireless Access Point |
| Wireless Standards | 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz and 5 GHz |
| MIMO | 2x2 |
| Max Data Rate | 300 Mbps |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Ethernet Ports | 1 x 10/100/1000BASE-T Ethernet |
| Power over Ethernet | 802.3af (PoE) |
| Antenna Gain | 3 dBi (2.4 GHz), 5 dBi (5 GHz) |
| Antennas | Internal |
| Mounting | Wall, Ceiling |
| Security | WPA, WPA2, 802.1X |
Details all items included in the MR16 package for installation.
Describes the physical features, ports, and hard points of the MR16 access point.
Explains methods for physically securing the MR16 access point against theft or dislodging.
Details the Ethernet ports and available power source options, including PoE.
Explains the functions of the factory reset button and the meaning of LED status indicators.
Information regarding the MR16's compliance with UL 2043 plenum-rating standards for air spaces.
Steps to configure your Meraki network dashboard for the MR16 access point.
Procedure for ensuring the MR16 has the latest firmware before installation for optimal performance.
Required firewall configurations to allow necessary outgoing connections for the MR16.
Explains methods for assigning routable IP addresses, dynamic or static, to MR16s.
Lists the essential tools required for performing the MR16 installation.
Identifies supplementary hardware items needed for MR16 installation beyond included kits.
Guidance on selecting an optimal mounting location for the MR16 for best coverage and performance.
Comprehensive guide covering mount plate attachment, powering, and physical mounting of the MR16.
Methods for physically securing the MR16 to its mount location using security screws or Kensington locks.
Steps to confirm the MR16 is operational and to test network coverage after installation.
To Next Page
