Need help?Do you have a question about the Meraki Outdoor and is the answer not in the manual?
General| Category | Wireless Access Point |
|---|---|
| Ingress Protection | IP67 |
| Model | Meraki Outdoor |
| Frequency Band | 2.4 GHz, 5 GHz |
| Ethernet Ports | 1 x 10/100/1000 BASE-T Ethernet (RJ45) |
| Power Source | PoE (802.3af) |
| Mounting | Pole or wall mount |
| Antennas | Integrated antennas |
| Security | WPA3, 802.1X |
| Management | Cloud-managed via Cisco Meraki Dashboard |
Lists items included in the Meraki Outdoor package.
Details the features and components of the Meraki Outdoor device.
Explains the meaning of LED indicators and the 'Run Dark' mode.
Steps to add and configure the Outdoor device in the Meraki Dashboard.
Required firewall ports and IP addresses for Meraki Outdoor.
Instructions for checking and upgrading the device firmware.
Guidance on assigning IP addresses to Meraki Outdoors.
Lists the necessary tools for installation.
Lists additional hardware required for installation.
Guidelines for selecting an optimal mounting location for the device.
Step-by-step guide to physically installing the Meraki Outdoor.
Instructions for deploying repeaters to create a mesh network.
Steps to verify device operation and test network coverage.
To Next Page
