Need help?Do you have a question about the Meraki MR33 and is the answer not in the manual?
General| MIMO | 2x2 |
|---|---|
| Radio Frequency | 2.4 GHz and 5 GHz |
| Maximum Data Rate | 1.3 Gbps |
| 2.4 GHz Radio Rate | 300 Mbps |
| 5 GHz Radio Rate | 867 Mbps |
| MU-MIMO | Yes |
| Bluetooth Low Energy (BLE) | Yes |
| Power over Ethernet (PoE) | 802.3af |
| Mounting Options | Wall, Ceiling |
| Wireless Standards | 802.11a/b/g/n/ac |
| Ethernet Ports | 1 x 10/100/1000 |
| Operating Temperature | 0°C to 40°C |
| Security | WPA2, 802.1X |
| Antennas | Integrated |
Steps to add and configure the MR33 in the Meraki Dashboard before installation.
Recommends checking and upgrading the MR33's firmware before mounting.
Explains firewall requirements for MR33 communication with the Cloud Controller.
Describes how to assign IP addresses (DHCP or static) to MR33 gateway devices.
Provides guidance on selecting an optimal mounting location for the MR33.
Details the process of mounting the MR33 access point using the provided mount plate.
To Next Page
