Need help?Do you have a question about the Meraki MR53 and is the answer not in the manual?
General| Model | MR53 |
|---|---|
| Category | Wireless Access Point |
| Maximum Data Rate | 2.5 Gbps |
| Antenna | Integrated Omni-directional antennas |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Wi-Fi Standards | 802.11a/b/g/n/ac |
| Power Options | 802.3at PoE |
| Mounting | Wall, ceiling |
| Security | WPA2, WPA3, 802.1X |
| Management | Meraki cloud management |
| Ethernet Ports | 2 x 10/100/1000BASE-T Ethernet (RJ45) |
Outlines steps to add an MR53 to a Meraki network via the Dashboard.
Recommends upgrading firmware before mounting for optimal performance.
Covers assigning routable IP addresses to MR53s via DHCP or static assignment.
Provides guidance on selecting an optimal mounting location for the MR53.
Outlines the two-step process of mounting the MR53 using the mount plate.
Explains how to attach the mount plate to various surfaces for installation.
Explains how to feed the Ethernet cable for power based on mounting type.
Details connecting the MR53 to power using the Meraki AC Adapter.
Explains powering the MR53 using the Meraki 802.3at PoE Injector.
To Next Page
