Need help?Do you have a question about the Meraki MR62 and is the answer not in the manual?
General| Model | MR62 |
|---|---|
| Category | Wireless Access Point |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Power Source | 802.3af PoE |
| Antennas | Internal |
| Mounting | Wall, Ceiling |
| Operating Humidity | 5% to 95% non-condensing |
| Wireless Standards | 802.11a/b/g/n |
| MIMO | 2x2 |
| Ethernet Ports | 2 |
| Operating Temperature | 0°C to 40°C |
Details the items included in the MR66 access point package.
Describes the physical features and components of the MR66 access point.
Explains the different antenna connectors and ports on the MR66.
Covers power sources, factory reset button, and LED indicators.
Steps to add the MR66 to your Meraki network via the Dashboard.
Instructions for ensuring the MR66 has the latest firmware before installation.
Details required firewall configurations and IP address assignment for MR66.
Lists necessary tools and additional hardware for the installation.
Guidelines for selecting the optimal mounting position for the MR66.
Covers plate removal, attachment to walls/poles, mounting the MR66, connecting antennas, power, and grounding.
Interpreting LEDs and confirming device and network connectivity.
Methods to ensure adequate signal strength throughout the coverage area.
Information on accessing the Meraki knowledge base for support.
FCC compliance statements and guidelines for US operation.
Regulatory requirements for installing and operating in Brazil.
EU compliance statements for R&TTE Directive 1999/5/EC.
Industry Canada compliance statements for Canadian operation.
To Next Page
