Merax WF195692 - User Manual

ASSEMBLY INSTRUCTIONS
ITEM # : WF195692 &WF195693
1-Follow the information on the warning label appearing on the upper bunk bed
and structure on the carton ...Do not remove warning label from bed
2-Alway use the recommended size mattress or mattress support, or both,
to help prevent the likelihood of entrapment or falls.
3-Surface of mattress must be at least 5 inches below the upper edge of guard rails.
4-Do not allow children under 6 years to use the upper bunk bed.
5-Prohibit more than one person on upper bunk.
6-Periodically check and ensure that the guardrail, ladder, and other components are
in their proper position, free from damage, and that all connectors are tight.
7-Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8-Always use the ladder for entering and leaving upper bunk.
9-Do not use substitute part. Contact the manufacturer or dealer for replacement part.
10-Use of night light may provide added safety precaution for a child using the upper
bunk.
11-If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed.
12-Always use guardrail on both long sides of the upper bunk.
13-The use of water or sleep flotation mattresses is prohibited.
14-Keep these instruction for future reference.
15-Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed, for example, but not limited to hooks, belts and jump rores.
SAFETY WARNINGS
Page 1
PLEASE DO NOT RETURN PRODUCT TO THE STORE.
If you have any problem or concerns, please feel free to contact our customer
service department. We will reply you as soon as possible.
E-Mail: csr@merax.com
Tel: 626-912-8886 Ext.100

Summary

Safety Warnings for Bunk Bed

General Safety Precautions

Follow all labels, use correct mattress size, ensure guardrail height, and prohibit children under 6 from upper bunk.

Usage Restrictions and Maintenance

Limit to one person per bunk, check components regularly, prohibit horseplay, and use only manufacturer parts.

Strangulation Hazard Warning

Never attach or hang items not designed for the bunk bed, like hooks or jump ropes.

Bunk Bed Assembly Steps

Headboard Assembly (I) - Step 1

Assemble the headboard using parts 1, 2, 3, 8, 9 and hardware H, D, N.

Headboard Assembly (I) - Step 2

Connect side rails (4) to headboard components using parts H, C, A, N.

Completed Twin Slat Assembly (I) - Step 3

Attach completed twin slats (16) to the frame using screws (M) and part I.

Headboard Assembly (I) - Step 4

Assemble headboards using parts 1, 2, 3, 12, 13 and hardware H, D, N.

Headboard Assembly (II) - Step 5

Assemble headboards using parts 4, 7, 10, 11, 12, 13, 4C, 4D and hardware H, C, A, N.

Headboard Assembly (II) - Step 6

Attach guardrails (6) to headboard components using parts 14, 15 and hardware H, C, B, N.

Headboard Assembly (II) - Step 7

Attach guardrails (6, 7) to frame components using parts 5, 14, 15 and hardware G, N.

Completed Twin Slat Assembly (II) - Step 8

Attach completed twin slats (16) to the frame using screws (M) and part I.

Ladder (II) Assembly - Step 9

Assemble ladder using parts 17, 18, 19 and hardware H, E, N.

Ladder (I)&(II) Assembly - Step 15

Attach ladder to headboards using parts 4c and hardware J, L, I.

Merax WF195692 Specifications

General

Brand	Merax
Model	WF195692
Category	Indoor Furnishing
Language	English