ASSEMBLY INSTRUCTION
WF317141 WF317142
1/16
N
otice
:
1. 50% Tighten before fixing all screws, Allen wrench is recommended instead
of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during assembly, please loosen all
the other screws to 50% and continue the assembly process.
5. If the item is not stable, please loosen all the screws, adjust it on a flat ground
and tighten up all screws again.
6. Note : If one or some screws are fully tightened during assembly, chances are
the others will not be aligned with holes. In addition, all the holes are designed
to be relatively larger to provide more space for the adjustment of the screws.
To Next Page
Need help?
General
