EasyManuals Logo

MerCruiser MX 6.2 MPI Owner's Manual

MerCruiser MX 6.2 MPI
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
Section 3 - On The Water
Page 48 90-864197070 JUNE 2007
Frequently check engine oil level. Add oil as needed. It is normal for oil consumption
to be high during the break‑in period.
After Break‑In Period
To help extend the life of your Mercury MerCruiser power package, the following
recommendations should be considered;
Ensure that propeller allows the engine to operate at or near the top of the specified
WOT RPM range (Refer to Specifications and Maintenance) when at full throttle with
a normal boat load.
Operation at 3/4 throttle setting or lower is recommended. Refrain from prolonged
operation at WOT RPM.
Change the engine oil and oil filter. Refer to Maintenance.
Change the transmission oil and filter. Refer to Maintenance (ZF Transmission
models).
1.
End of First Season Checkup
At the end of the first season of operation, contact an authorized Mercury MerCruiser dealer
to discuss and/or perform scheduled maintenance items. If you are in an area where the
product is operated continuously, year‑round, you should contact your dealer at the end of
the first 100 hours of operation or once yearly, whichever occurs first.
1. Require fluid and filter change after the first 25 hours and then every 100 hours.

Table of Contents

Other manuals for MerCruiser MX 6.2 MPI

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MerCruiser MX 6.2 MPI and is the answer not in the manual?

MerCruiser MX 6.2 MPI Specifications

General IconGeneral
BrandMerCruiser
ModelMX 6.2 MPI
CategoryEngine
LanguageEnglish

Related product manuals